Trigger Tab Parameters

Back to index: CVM.md

Core (Shared)

UI Name	Config Key	Type	Range/Options	Default	Description	Notes
Enable Triggerbot	`enabletb`	bool	`true` / `false`	`false`	Master switch for triggerbot logic.	Trigger logic still depends on activation mode and keybind state.
Trigger Type	`trigger_type`	enum (string)	`current`, `rgb`	`current`	Selects which trigger engine runs.	`Classic Trigger` uses HSV pipeline; `RGB Trigger` uses fixed RGB preset matching.
FOV Size	`tbfovsize`	float	`1` to `300`	`5`	Trigger detection field-of-view size.	Used as ROI scale source in trigger processing.

Classic Trigger Mode (`trigger_type = current`)

Delay and Hold

UI Name	Config Key	Type	Range/Options	Default	Description	Notes
Delay Range (min)	`tbdelay_min`	float	`0.0` to `1.0` seconds	`0.08`	Minimum pre-fire delay.	Runtime picks value in `[min, max]`.
Delay Range (max)	`tbdelay_max`	float	`0.0` to `1.0` seconds	`0.15`	Maximum pre-fire delay.	Keep `max >= min`.
Hold Range (min)	`tbhold_min`	int	`5` to `500` ms	`40`	Minimum hold duration per click cycle.	Runtime picks value in `[min, max]`.
Hold Range (max)	`tbhold_max`	int	`5` to `500` ms	`60`	Maximum hold duration per click cycle.	Keep `max >= min`.

Trigger Conditions

UI Name	Config Key	Type	Range/Options	Default	Description	Notes
Min Pixels	`trigger_min_pixels`	int	`1` to `200`	`4`	Minimum detected pixels required before firing logic is considered valid.	Noise guard for tiny false positives.
Min Ratio	`trigger_min_ratio`	float	`0.0` to `1.0`	`0.03`	Minimum pixel ratio threshold for trigger validation.	Relative gate for target occupancy in ROI.
Confirm Frames	`trigger_confirm_frames`	int	`1` to `10`	`2`	Consecutive valid frames required before firing.	Higher value reduces flicker-triggered shots.

Burst Settings

UI Name	Config Key	Type	Range/Options	Default	Description	Notes
Cooldown Range (min)	`tbcooldown_min`	float	`0.0` to `5.0` seconds	`0.0`	Minimum cooldown between burst sequences.	Runtime picks value in `[min, max]`.
Cooldown Range (max)	`tbcooldown_max`	float	`0.0` to `5.0` seconds	`0.0`	Maximum cooldown between burst sequences.	Keep `max >= min`.
Burst Count Range (min)	`tbburst_count_min`	int	`1` to `10`	`1`	Minimum number of shots per burst.	Runtime picks integer in `[min, max]`.
Burst Count Range (max)	`tbburst_count_max`	int	`1` to `10`	`1`	Maximum number of shots per burst.	Keep `max >= min`.
Burst Interval Range (min)	`tbburst_interval_min`	float	`0` to `500` ms	`0.0`	Minimum interval between shots in same burst.	Runtime picks value in `[min, max]`.
Burst Interval Range (max)	`tbburst_interval_max`	float	`0` to `500` ms	`0.0`	Maximum interval between shots in same burst.	Keep `max >= min`.

RGB Mode (`trigger_type = rgb`)

RGB Preset List

UI Name	Config Key	Type	Range/Options	Default	Description	Notes
RGB Preset	`rgb_color_profile`	enum (string)	`red`, `yellow`, `purple`	`purple`	Selects fixed RGB target color and tolerance profile.	Preset values are fixed in code.

Preset definitions: - red: RGB(180, 40, 40), tolerance 30 - yellow: RGB(230, 230, 80), tolerance 35 - purple: RGB(161, 69, 163), tolerance 25~30 (runtime uses upper bound)

RGB Timing

UI Name	Config Key	Type	Range/Options	Default	Description	Notes
Delay Range (min)	`rgb_tbdelay_min`	float	`0.0` to `1.0` seconds	`0.08`	Minimum pre-fire delay in RGB mode.	Runtime picks value in `[min, max]`.
Delay Range (max)	`rgb_tbdelay_max`	float	`0.0` to `1.0` seconds	`0.15`	Maximum pre-fire delay in RGB mode.	Keep `max >= min`.
Hold Range (min)	`rgb_tbhold_min`	int	`5` to `500` ms	`40`	Minimum click hold duration in RGB mode.	Runtime picks value in `[min, max]`.
Hold Range (max)	`rgb_tbhold_max`	int	`5` to `500` ms	`60`	Maximum click hold duration in RGB mode.	Keep `max >= min`.
Cooldown Range (min)	`rgb_tbcooldown_min`	float	`0.0` to `5.0` seconds	`0.0`	Minimum cooldown after a shot in RGB mode.	Runtime picks value in `[min, max]`.
Cooldown Range (max)	`rgb_tbcooldown_max`	float	`0.0` to `5.0` seconds	`0.0`	Maximum cooldown after a shot in RGB mode.	Keep `max >= min`.

RGB mode behavior: - Uses center ROI derived from tbfovsize. - Does not depend on target list gating. - Fires single click cycle (press -> hold -> release), no burst count/interval settings.

Activation (Shared)

UI Name	Config Key	Type	Range/Options	Default	Description	Notes
Keybind	`selected_tb_btn`	int	`0..4` mapped to mouse buttons	`1`	Triggerbot activation button.	Mapping: `0=Left`, `1=Right`, `2=Middle`, `3=Side4`, `4=Side5`.
Trigger Mode	`trigger_activation_type`	enum (string)	`hold_enable`, `hold_disable`, `toggle`	`hold_enable`	Activation style for trigger logic.	UI labels: Hold to Enable/Disable, Toggle.

Strafe Helper (Shared, Conditional)

Supported APIs for this feature: - SendInput - Net - KmboxA - DHZ

When hidden, trigger_strafe_mode is forced to off.

UI Name	Config Key	Type	Range/Options	Default	Description	Notes
Mode	`trigger_strafe_mode`	enum (string)	`off`, `auto`, `manual_wait`	`off`	Selects strafe-helper behavior.	`off`: disabled; `auto`: inject opposite movement key before trigger shot; `manual_wait`: allow trigger only under neutral movement input.
Auto Lead (ms)	`trigger_strafe_auto_lead_ms`	int	`0` to `50`	`8`	Delay between injected opposite key-down and trigger shot.	Visible only in `auto` mode.
Neutral Wait (ms)	`trigger_strafe_manual_neutral_ms`	int	`0` to `300`	`0`	Required neutral movement duration before trigger is allowed.	Visible only in `manual_wait` mode.

Manual wait neutral definition: - Horizontal axis is neutral when A+D are both pressed or both released. - Vertical axis is neutral when W+S are both pressed or both released. - Trigger is allowed only when both axes are neutral.

Quick Tuning Workflow

Start with trigger_type=current and a small tbfovsize for controlled testing.
Set delay/hold ranges with min=max first to observe deterministic behavior.
Tune validation gates in this order: trigger_min_pixels -> trigger_min_ratio -> trigger_confirm_frames.
Add randomness by widening min/max ranges only after baseline behavior is stable.
If you use RGB mode, verify preset fit first, then tune RGB timing separately from current mode.

Symptom to Parameter Map

Symptom	Primary Keys	Direction
Fires too often on noise	`trigger_min_pixels`, `trigger_min_ratio`, `trigger_confirm_frames`	Increase gradually
Feels late to fire	`tbdelay_min/max`, `trigger_confirm_frames`	Reduce delay first, then lower confirm frames
Burst too aggressive	`tbburst_count_`, `tbburst_interval_`, `tbcooldown_*`	Lower count, increase interval/cooldown
RGB mode misses obvious targets	`rgb_color_profile`, `tbfovsize`, `rgb_tbdelay_*`	Verify color preset, then retune FOV and delay
Inconsistent behavior between sessions	Min/max ranges too wide	Narrow ranges and re-validate

Practical Range Guardrails

Keep max >= min for all ranged keys; if uncertain, set equal values and expand later.
Large ROI (tbfovsize) increases chance of incidental color hits; pair with stricter validation thresholds.
For tap-heavy weapons, shorter hold and moderate cooldown usually produce cleaner trigger rhythm.